sdudeja
11-20 12:56 PM
Hi
Teacher H1 is same as any other H1. There are consultancies hiring teachers. You can join based on your qualifications and experience. You get a 3 year certification based on your evaluation of credentials. I mentioned a company GTRR. You can contact them. Their site is gtrr.net. My cell number is 404-704-2455.
All the best
Teacher H1 is same as any other H1. There are consultancies hiring teachers. You can join based on your qualifications and experience. You get a 3 year certification based on your evaluation of credentials. I mentioned a company GTRR. You can contact them. Their site is gtrr.net. My cell number is 404-704-2455.
All the best
wallpaper Óbidos - Il castello
shx
05-25 04:01 AM
Fax sent
avi101
07-11 11:29 AM
Well said, logiclife. But from what I know, such employers just open up another company, not in their name, but their spouse or sibling or such and operate behind the scenes until its safe to come out. Other strategies they employ, send payment checks to employees old address on file knowing for sure that its gonna come back thereby delaying the process more.
The other side to the coin is that many times benching is an unholy marriage of convenience between the employer and employee. Employee does not want to go back and does not want H1 revoked and stickes a deal with employer. So its not always the employer at fault.
The other side to the coin is that many times benching is an unholy marriage of convenience between the employer and employee. Employee does not want to go back and does not want H1 revoked and stickes a deal with employer. So its not always the employer at fault.
2011 Obidos
needinfo80
09-11 11:10 AM
But if your form is signed with today's date then doctor might want you to take blood work again as they are no longer invalid if they are more than 1 yr old.
Again this are grey areas.There are no concrete answers.
Again this are grey areas.There are no concrete answers.
more...
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
gc_chahiye
11-29 05:21 PM
I got this RFE email Nov 28th. Yet to receive the letter so do not have the "response time window".
Assuming they give me 6 weeks (Jan 7th) to respond. I will request my attorney to fax and then courier the Response to USCIS on Jan 3rd(Friday). I am planning to fly back on Jan 5th(Sunday). This way when I am at POE the I-485 status is still pending. It s..ks to do all these manipulations... but this trip is long pending and some urgent issues need to be taken care during this trip.
sure. Just make sure you dont cut it too close.. I have had numerous run-ins with Mr Murphy (http://en.wikipedia.org/wiki/Murphy's_law).
Always make allowances for things like your attorney missing his flight back from a new years party in the Bahamas; or waking up too drunk on Jan 2nd to be able to even know the full form of RFE :)
Also, depends on what the RFE is:
* if its just EVL, payslips (possible, with your job moves), then its pretty much a formality and you are all set for your GC.
* If its medicals then you might need to scramble to get it done on time (might as well take an appointment now for around Dec 10th, you can cancel it if the RFE is for something else).
* If its something like details of your status going back to first entry into US and things like that then you want to be careful and possibly delay your response to ensure you are back here to fight it out in case you run into problems with some mistake on their side.
If I were you, I would take the medical appointment, then wait for the RFE to decide the next steps...
Assuming they give me 6 weeks (Jan 7th) to respond. I will request my attorney to fax and then courier the Response to USCIS on Jan 3rd(Friday). I am planning to fly back on Jan 5th(Sunday). This way when I am at POE the I-485 status is still pending. It s..ks to do all these manipulations... but this trip is long pending and some urgent issues need to be taken care during this trip.
sure. Just make sure you dont cut it too close.. I have had numerous run-ins with Mr Murphy (http://en.wikipedia.org/wiki/Murphy's_law).
Always make allowances for things like your attorney missing his flight back from a new years party in the Bahamas; or waking up too drunk on Jan 2nd to be able to even know the full form of RFE :)
Also, depends on what the RFE is:
* if its just EVL, payslips (possible, with your job moves), then its pretty much a formality and you are all set for your GC.
* If its medicals then you might need to scramble to get it done on time (might as well take an appointment now for around Dec 10th, you can cancel it if the RFE is for something else).
* If its something like details of your status going back to first entry into US and things like that then you want to be careful and possibly delay your response to ensure you are back here to fight it out in case you run into problems with some mistake on their side.
If I were you, I would take the medical appointment, then wait for the RFE to decide the next steps...
more...
kcindian
08-03 08:13 PM
Hi,
My EAD expires October 21 2008. I had applied for EAD and AP renewal July 1 and got my LIN numbers by July 7th. The official dates on the USCIS websites are for July 7th. I have not gotten my FP notices yet.
Can anybody tell me based on experience, how long is it taking for NSC to approve renewal cases?
My PD is July 2003 - EB3.
KC Indian
My EAD expires October 21 2008. I had applied for EAD and AP renewal July 1 and got my LIN numbers by July 7th. The official dates on the USCIS websites are for July 7th. I have not gotten my FP notices yet.
Can anybody tell me based on experience, how long is it taking for NSC to approve renewal cases?
My PD is July 2003 - EB3.
KC Indian
2010 obidos. Previous
Sakthisagar
11-17 09:16 AM
The President is once again giving Political KULFI to all Legal immigrants.
See below
In an Oval Office meeting today, the President and leaders of the Congressional Hispanic Caucus (CHC) � U.S. Senator Robert Menendez of New Jersey, U.S. Representative Nydia Velazquez of New York, and U.S. Representative Luis Gutierrez of Illinois � discussed the options on immigration reform immediately facing the Congress. He thanked them for their constant efforts on this issue. The President and the CHC leaders believe that, before adjourning, Congress should approve the DREAM Act. This legislation has traditionally enjoyed support from Democratic and Republican lawmakers and would give young people who were brought as minors to the United States by their parents the opportunity to earn their citizenship by pursuing a college degree or through military service.The President reiterated his support for fixing the broken immigration system and urged the CHC leaders to work to restore the bipartisan coalition backing comprehensive immigration reform. The President repeated his hope that, with the election season�s pressures past, Congressional Republicans would work with their Democratic colleagues not only to strengthen security at the nation�s borders, but also to restore responsibility and accountability to what everyone agrees is a broken immigration system. The President reiterated his strong support for bipartisan Congressional action on immigration reform at the earliest opportunity, noting that the American people expect both parties to work together to tackle the challenges confronting our nation.
Readout of the President's Meeting with Representatives of the Congressional Hispanic Caucus Today | The White House (http://www.whitehouse.gov/the-press-office/2010/11/16/readout-presidents-meeting-with-representatives-congressional-hispanic-c)
See below
In an Oval Office meeting today, the President and leaders of the Congressional Hispanic Caucus (CHC) � U.S. Senator Robert Menendez of New Jersey, U.S. Representative Nydia Velazquez of New York, and U.S. Representative Luis Gutierrez of Illinois � discussed the options on immigration reform immediately facing the Congress. He thanked them for their constant efforts on this issue. The President and the CHC leaders believe that, before adjourning, Congress should approve the DREAM Act. This legislation has traditionally enjoyed support from Democratic and Republican lawmakers and would give young people who were brought as minors to the United States by their parents the opportunity to earn their citizenship by pursuing a college degree or through military service.The President reiterated his support for fixing the broken immigration system and urged the CHC leaders to work to restore the bipartisan coalition backing comprehensive immigration reform. The President repeated his hope that, with the election season�s pressures past, Congressional Republicans would work with their Democratic colleagues not only to strengthen security at the nation�s borders, but also to restore responsibility and accountability to what everyone agrees is a broken immigration system. The President reiterated his strong support for bipartisan Congressional action on immigration reform at the earliest opportunity, noting that the American people expect both parties to work together to tackle the challenges confronting our nation.
Readout of the President's Meeting with Representatives of the Congressional Hispanic Caucus Today | The White House (http://www.whitehouse.gov/the-press-office/2010/11/16/readout-presidents-meeting-with-representatives-congressional-hispanic-c)
more...
fatboysam
05-16 09:40 AM
I have couple of doubts whether i will be able to qualify or not, which i want to clairify.
Ofcourse i will apply in Skilled workers category, i do not have any Canada experience, so according to the official website, i might not qualify because i am not a Manager.
I do not see any option for a software engineer, Am i missing anything ?
Immigrating to Canada: Skilled workers and professionals - Who can apply (http://www.cic.gc.ca/english/immigrate/skilled/apply-who.asp)
Ofcourse i will apply in Skilled workers category, i do not have any Canada experience, so according to the official website, i might not qualify because i am not a Manager.
I do not see any option for a software engineer, Am i missing anything ?
Immigrating to Canada: Skilled workers and professionals - Who can apply (http://www.cic.gc.ca/english/immigrate/skilled/apply-who.asp)
hair Albergaria Josefa d#39;Obidos
gc_on_demand
10-22 01:04 PM
I am trying to figure out the same and after rigorous communication with my lawyer and a few companies, I came to an estimate that it may take anywhere between, atleast 12-18 mnths on a thumb rule. Again, I understand its on a case by case basis.
Reasons ::
(1) Most of Desi companies filed under Eb2. Those are EB3 are mostly from american companies. And even if they qualified for Eb2 , companies filed for Eb3. So its any one 's guess that these companies will file new Eb2.
(2) Process takes 12- 18 months even if companies are ready
(3) Eb2 has tough criteria and lots of scrutiny.
(4) Desi companies are scared to file for new Eb2 when their H1bs are under review too.
Reasons ::
(1) Most of Desi companies filed under Eb2. Those are EB3 are mostly from american companies. And even if they qualified for Eb2 , companies filed for Eb3. So its any one 's guess that these companies will file new Eb2.
(2) Process takes 12- 18 months even if companies are ready
(3) Eb2 has tough criteria and lots of scrutiny.
(4) Desi companies are scared to file for new Eb2 when their H1bs are under review too.
more...
mundada
09-29 10:27 AM
Hey I got my receipt last Saturday and have FP scheduled on Oct. 3 at Newark. Call USCIS and check for FP notice.
Hello Guys,
Does any one here has Newark NJ as their ASC? Reason is my notice date is august 27th from TSC and I haven't received my FP notice yet. My wife has the similar issue as well. I've called USCIS atleast twice but they are not ready to open service request and are saying that the ASC must be busy.
I wanted to find out if any one of you here has notice date after august 27th and have already got FP notice from Newark (NJ) ASC.
Thanks.
Hello Guys,
Does any one here has Newark NJ as their ASC? Reason is my notice date is august 27th from TSC and I haven't received my FP notice yet. My wife has the similar issue as well. I've called USCIS atleast twice but they are not ready to open service request and are saying that the ASC must be busy.
I wanted to find out if any one of you here has notice date after august 27th and have already got FP notice from Newark (NJ) ASC.
Thanks.
hot O Castelo de Óbidos fica na
fcres
06-27 12:05 PM
His lawyer was right. If he has H1 he can do H1 transfer to another employer and invoke AC21 to continue AOS.
I see, so that means if i have to invoke AC21 i do H1 transfer. But what if the other company don't want to do H1? Then i guess working on EAD is the only option.
I see, so that means if i have to invoke AC21 i do H1 transfer. But what if the other company don't want to do H1? Then i guess working on EAD is the only option.
more...
house Óbidos
gcfriend65
05-14 04:24 PM
Guys,
The timing of this visa bulletin is suspicious. Right at the nick of time, when the senate is discussing increasing EB quotas, this news comes in. Plus they are saying that there will be forward movement, in the EB cut-off dates in the coming months to rhyme with the current negotatitions in Congress on CIR/ SKIL.
IV should not step behind in their legislation efforts. Even, if visa bulletin dates are current today, they might retrogress later, when the I-485 application starts to process (Current I-485 processing time shows applications processing as of Sept. 10, 2006, which is 8 months before). No one knows, if eight months from now, the cut-off dates will retrogress further or advance, due to the BEC closing out in Sept. 2007 and PERM applications processed from March 2005 onwards.
The timing of this visa bulletin is suspicious. Right at the nick of time, when the senate is discussing increasing EB quotas, this news comes in. Plus they are saying that there will be forward movement, in the EB cut-off dates in the coming months to rhyme with the current negotatitions in Congress on CIR/ SKIL.
IV should not step behind in their legislation efforts. Even, if visa bulletin dates are current today, they might retrogress later, when the I-485 application starts to process (Current I-485 processing time shows applications processing as of Sept. 10, 2006, which is 8 months before). No one knows, if eight months from now, the cut-off dates will retrogress further or advance, due to the BEC closing out in Sept. 2007 and PERM applications processed from March 2005 onwards.
tattoo Learn more about Obidos
indyanguy
08-07 09:17 AM
sometimes, labor subs can be genuine cases as well....
more...
pictures obidos. obidos medieval jpg
boston_gc
05-30 10:04 PM
Thank you everyone.
I did my share and sent the webfax.
I did my share and sent the webfax.
dresses 12 Obidos Bed and Breakfasts,
gcgreen
07-07 04:04 PM
to my knowledge, the first year that she started it would be no problem.
but in subsequent years you do need to pay estimated taxes or be subject to underpayment penalty. also, because estimated taxes are pay as you go, you do need to make payments on the payment deadlines.
for some really screwed up reason, the payment deadlines are not precisely three months apart: apr 15, jun 15, sep 15 and jan 15
the amount of estimated tax you need to have paid in order to have paid is calculated based on a worksheet that you can download from the IRS website.
But the general rule of thumb you need to follow is that you should have paid AT LEAST the previous year's taxes by this year including all withholdings and estimated tax payments. For example, if you owed $30000 in federal taxes in 2007, make sure the sum of all estimated taxes and withholdings for 2008 meets or exceeds 30000. I also think there is a rule that if your AGI was greater than 150K in the previous year, you need to pay at least 110% of prior year's tax amount. I am not sure of this one. But generally speaking, I think this rule is called safe harbor rule.
The other rule you can adopt is to ensure that you pay at least 90% tax that you will owe for 2008 by end of 2008. In other words, if you end up owing 40000 this year, make sure you have paid at least 36000 by end of this year.
You can find more info at:
http://www.fairmark.com/estimate/whomust.htm
http://finance.yahoo.com/taxes/article/101936/FAQs_on_estimated_taxes#howcalculate
I hope this information was helpful. Bear in mind, I am no expert on this, and all this info is just by reading various online sources, IRS docs etc.
Continuation..
My wife is working as an independent contractor(1099-misc) on an EAD. I am also on EAD on W2(full time employment).
We file our taxes jointly and hence instead of making advance payments/estimated tax payments quarterly, cant I just have my company withhold more money from my paycheck every month?
That would make things so much more easier..
but in subsequent years you do need to pay estimated taxes or be subject to underpayment penalty. also, because estimated taxes are pay as you go, you do need to make payments on the payment deadlines.
for some really screwed up reason, the payment deadlines are not precisely three months apart: apr 15, jun 15, sep 15 and jan 15
the amount of estimated tax you need to have paid in order to have paid is calculated based on a worksheet that you can download from the IRS website.
But the general rule of thumb you need to follow is that you should have paid AT LEAST the previous year's taxes by this year including all withholdings and estimated tax payments. For example, if you owed $30000 in federal taxes in 2007, make sure the sum of all estimated taxes and withholdings for 2008 meets or exceeds 30000. I also think there is a rule that if your AGI was greater than 150K in the previous year, you need to pay at least 110% of prior year's tax amount. I am not sure of this one. But generally speaking, I think this rule is called safe harbor rule.
The other rule you can adopt is to ensure that you pay at least 90% tax that you will owe for 2008 by end of 2008. In other words, if you end up owing 40000 this year, make sure you have paid at least 36000 by end of this year.
You can find more info at:
http://www.fairmark.com/estimate/whomust.htm
http://finance.yahoo.com/taxes/article/101936/FAQs_on_estimated_taxes#howcalculate
I hope this information was helpful. Bear in mind, I am no expert on this, and all this info is just by reading various online sources, IRS docs etc.
Continuation..
My wife is working as an independent contractor(1099-misc) on an EAD. I am also on EAD on W2(full time employment).
We file our taxes jointly and hence instead of making advance payments/estimated tax payments quarterly, cant I just have my company withhold more money from my paycheck every month?
That would make things so much more easier..
more...
makeup obidos. Muralhas de Óbidos
reddymjm
09-19 10:38 AM
There is No formula. It is Lucky or Unlucky.
It is based on Karma. I know people who got GC in 20 days and still waiting for it for 10 years. I am waiting on it for 5 years now. Do not try to come up with formulas. I and my friend with the same pd filed on the same day. His went to TSC and mine to NSC. He already got his GC 2 weeks ago.
It is based on Karma. I know people who got GC in 20 days and still waiting for it for 10 years. I am waiting on it for 5 years now. Do not try to come up with formulas. I and my friend with the same pd filed on the same day. His went to TSC and mine to NSC. He already got his GC 2 weeks ago.
girlfriend obidos
sundarpn
08-01 11:44 PM
EB3 with PD of July 2006. I-140 Approved. 485 +EAD+AP filed 2 weeks ago.
I was contemplating on job change before dates became current in June and decision to accept 485....
Now that 485 is filed and this DUST has settled, wondering whether all this is worth the wait. (even 180 days).
Currently in my 5th year of H1b, by waiting out the 6 months, I'll also get 3 yr h1b ext. (and hopefully ead by then).
So is waiting 180 days the best choice? or screw all this and change! (I dunno if this AC21 etc etc is practical...same job description etc)
(I am single and those complexities are not to be considered I guess yet.
Plan is to try and change jobs on H1b and use EAD only if there is a dire need like layoff to find another job quicker)
I was contemplating on job change before dates became current in June and decision to accept 485....
Now that 485 is filed and this DUST has settled, wondering whether all this is worth the wait. (even 180 days).
Currently in my 5th year of H1b, by waiting out the 6 months, I'll also get 3 yr h1b ext. (and hopefully ead by then).
So is waiting 180 days the best choice? or screw all this and change! (I dunno if this AC21 etc etc is practical...same job description etc)
(I am single and those complexities are not to be considered I guess yet.
Plan is to try and change jobs on H1b and use EAD only if there is a dire need like layoff to find another job quicker)
hairstyles apartment Portugal Obidos
GCNirvana007
04-04 05:44 PM
I need expert advice -
My I-140 has been approved and I-485 pending for more than 18 months. I have a valid EAD & AP. I also have a valid H1-B visa valid till 2011,
that I am using for my current employment with my current employer
1. If I get laid-off, how long can I stay in US without another job?
Active EAD should keep your status ok
2. I understand that in order to maintain my eligibility to "port" to a new employer / sponsor under AC21, I should have another job in same or similar occupation. Till I find another job, am I allowed to do some part-time job in different occupation?
3. If new employer gives me the option to move permanently to its subsidiary in another country, what are the available option for me to continue with green card processing?
4. If after going out of the country , I want to come back in future before Green card approval, what will be the available options? AP can be used to travel and return
My I-140 has been approved and I-485 pending for more than 18 months. I have a valid EAD & AP. I also have a valid H1-B visa valid till 2011,
that I am using for my current employment with my current employer
1. If I get laid-off, how long can I stay in US without another job?
Active EAD should keep your status ok
2. I understand that in order to maintain my eligibility to "port" to a new employer / sponsor under AC21, I should have another job in same or similar occupation. Till I find another job, am I allowed to do some part-time job in different occupation?
3. If new employer gives me the option to move permanently to its subsidiary in another country, what are the available option for me to continue with green card processing?
4. If after going out of the country , I want to come back in future before Green card approval, what will be the available options? AP can be used to travel and return
msyedy
01-08 09:24 PM
My view is little different, my friend(32 age) who is a business man (an engineer and MBA)..went with his wife and two kids to b2 stamping, got multiple entry visa for 10 yrs. His preparation is very simple, he showed his business commitments and need of his presence to the businesses he is handling and second..he could convince the consulate that he is visiting to US for the sake of kids enjoy desney...he previously visited s'pore and klm...
if your folks are doing a honest visit..i would suggest them not to show any siblings in US and they show their ability to fund their trip and a convincing reason..(like second honeymoon...or any business conference)...and i remind you there is no set pattern that a few will get and a few won't get...its all up to how you present your case....goodluck
************************************************** *****
As my friend in this have mentioned.. keep in mind there is no paper that will make it 100% to get a US visa. I have seen luck plays a big role in many of the cases.
GOOD LUCK.
if your folks are doing a honest visit..i would suggest them not to show any siblings in US and they show their ability to fund their trip and a convincing reason..(like second honeymoon...or any business conference)...and i remind you there is no set pattern that a few will get and a few won't get...its all up to how you present your case....goodluck
************************************************** *****
As my friend in this have mentioned.. keep in mind there is no paper that will make it 100% to get a US visa. I have seen luck plays a big role in many of the cases.
GOOD LUCK.
seeniraj
03-20 10:47 PM
Do you know the reason for the 140 denial ?
No comments:
Post a Comment